© PCE Instruments
5
6.1
Measuring window
6.1.1
Graphical view
To switch to the graphical view, press the "GRAPH" key. Here, the course of the PM2.5
concentration is displayed. Use the up/down arrow keys to scroll between the individual pages.
Press the "GRAPH" key again to return to the numerical view.
Note:
To access a specific measuring point, go to the "Records" view, see 6.2 Records.
6.1.2
Number of particles and mass concentration
To switch between particle count and mass concentration, press the "MODE" key.
6.1.3
Set alarm limit
To set the alarm limit value, press the "ALARM VALUE" key in the measuring window. The value
can be changed with the arrow keys. Press the "ENTER" key to accept the set value. To activate
or deactivate the alarm, press the speaker key. If a speaker is displayed for PM2.5, the acoustic
alarm is active.
Note:
This alarm limit value only refers to the PM2.5 value.
6.2
Records
In the "Records" view, the currently recorded measuring points can be viewed. To select between
the individual measuring points, first press the "ENTER" key. Then use the arrow keys to move
to the desired measuring point.
Press the "ENTER" key again to be able to select between the views again.
6.3
Settings
To make settings, first press the "ENTER" key. A parameter can now be selected with the up/down
arrow keys. Use the left and right arrow keys to change the respective parameter. Press the
"ENTER" key to confirm the setting.
Setting
Meaning
OFF Backlight
Setting the backlight
Record interval
Setting the recording interval.
Note:
when an interval is set, recording starts immediately. The quantity
of recorded measurement data can be seen in the measurement
window.
Brightness
Setting the brightness
Data Clear
Deleting recorded measurement data.
Note:
This has no effect on the memory space for the PDFs that are
already saved.
Time & Date
Setting the date and time
Auto shutdown
Set automatic power off
Language
Set language
Reset
Reset the meter to factory settings
