Manual
7
- Peak value up / down
- Save the curve
With
you can switch between the displayed menu items and select the desired menu item with the
help of
.
Turn off the storage
("no saving")
When this button is pressed, no measurement values are stored.
Storing the upper and lower peak values ("peak value up / down")
If you press
here, the memory function of the peak values is activated.
First, the upper peak value is displayed. Indicator
appears at the bottom of the display. With the
help of
the display of the stored value is switched. Then the lower peak value follows, and
appears on display. The current measurement value is displayed in this operating mode additionally in the
lower section of the display (in a smaller representation).
With
the display is switched again. Then only the current measurement value is displayed again.
Note: The stored peak values are retained until the
Clear key
(CLR, button 2) is pressed. Undeleted peak
values are retained and displayed again when the peak measurement is enabled. They will be only
overwritten with higher values.
Curve storage (“Curve")
Clicking
activates the function “curve storage”.
5.2.1.1
Define the number of peak values (“select the quantity”)
This function makes it possible to determine the number of peak values that will be stored in the same
file. Pressing
(key 6) opens a window in which the number of to be stored peak values can be set.
The factory default setting is 10.
5.2.1.2
Curve recording duration (”time curve”)
If you press
the function "time curve" is activated. This function allows setting the recording time (1 to
600 s) of a curve. After pressing the window "
seconds
” opens, in which the time must be entered.
Note:
The maximum duration of the recording is limited by the size of the measuring frequency.
5.2.1.3
“Delete”
In the menu levels “delete peak value”, “delete curve” and “delete all” the saved files can be deleted.
Pressing
(key 6) on the desired function opens the selection window. The options are “OK” and “Exit”.
Selection of the desired option is carried out with the help of
. Confirm your choice with
