© PCE Instruments
6
4.1
Keys and connections
Name
Description
HOLD
Reading can be held
LPF
Low pass filter 50 Hz/60 Hz
FUNC
To switch measuring functions
Zero
Resets zero point when making current measurement
COM (black)
Ground connection (-)
Ω, Temp, diode
Connection for direct measurements (+)
Rotary switch
To turn meter on/off, to select measuring function
4.2
Display description
Displayed
Description
Direct / alternating current, direct / alternating voltage
Diode test
Continuity test
AUTO
Measurement range set automatically
MAX
Highest reading is displayed
MIN
Lowest reading is displayed
Auto Power Off function activated
Batteries are discharged and must be replaced
H
Displayed reading is held
V
Voltage measurement (Volt)
A
Current measurement (Ampere)
nF, µF,
mF
Nano-/ Micro-/ Millifarat (capacitors)
Ω, kΩ, MΩ Kilo-/ Megaohm (resistors)
ZERO
Zero point was set
°C °F
Degrees Celsius / degrees Fahrenheit
LPF
Low pass filter is active
5
Key functions
The functions of the meter
’s keys are described in the following sub-chapters.
5.1
Hold reading
To freeze the currently displayed reading, short-press the
“
LPF/HOLD
“ key. The reading will be
held. To resume the measurement, press the
“
LPF/HOLD
“ key again. An “
H
“ will be displayed as
soon as this function is active.
