© PCE Instruments
3
4
Operation Instructions
1.
Press the
power
button to turn the meter on.
2.
Press the
set
b
utton; the meter will now display “Select kind” and “Adjust moisture”.
3.
Press
set
again to select “Select kind”
4.
Use the
+
and
–
buttons to navigate the menu
5.
Press
set
to select the desired grain type; the meter will now return to measurement
mode.
Important!
6.
Fill the measuring cup ½ full with grain. Gently shake the meter to settle the grains. Full
the measuring cup to the top.
7.
Gently press the cover down during measurement to ensure accurate results. If the
grains settle further after pressing the cover down, refill again to the top and measure
again.
8.
Remove the cover and replace the sample grains with a new sample.
9.
Pressing the
set
button after 2 or more measurement will display the average value of
the measurement results.
Using the
+
and
–
buttons in measurement mode will adjust the display brightness.
The meter will display “LOW” of the battery runs low.
5
Moisture Value Correction
Depending on the environment, a grain may have varied moisture. This can be adjusted for each
grain type individually.
1.
Press the
set
button; the meter will now display “Select kind” and “Adjust moisture”.
2.
Press
set
again to select “Select kind
3.
Use the
+
or
–
button to navigate the menu
4.
Press
set
to select the desired grain type; the meter will now return to measurement
mode.
5.
Press
set
again, but this time
select “Adjust moisture”
6.
Use the
+
and
–
buttons to adjust the moisture value.
7.
Press and hold the
set
button to save the value and return to the measurement mode.
6
Maintenance
•
Before use, please place the grains and the meter in the same location and under the
same temperature to ensure measurement accuracy.
•
Handle the meter with care.
•
Ensure the battery is in good condition. Battery leakage can cause damage to the
meter.
•
Use the provided brush to gently clean the measuring cup after use.
