© PCE Instruments
5
5
Main menu and symbols
Open the main menu by pressing the enter key.
Select the desired menu symbol with the left and right keys or return with the left function key.
5.1
Functions
In the
“Functions” setting on the left, you can make changes to the alarm functions. Select the
item
“Setting” with the left or right key.
Alarm settings: Select between Td/f (dew point), T (temperature) or RH (relative humidity) with
the enter key.
Setting the upper limit value:
Use the arrow down key to select the item
“High Limit” and then press the enter key. Now you
can enter a value with the up and down keys and confirm it by pressing the enter key again.
Setting the lower limit value:
Use the arrow down key to go to the item "Low Limit" and then press the enter key. Now you can
enter a value with the up and down keys and confirm it by pressing the enter key again.
Alarm on/off:
Use the arrow keys to select On/Off and press the enter key to activate the alarm. If the measured
value exceeds the high limit value or falls below the low limit value, the bell symbol appears at
the top and an acoustic signal can be heard. Press the enter key again to deactivate the alarm.
