© PCE Instruments
38
Eng
li
s
h
Print currently displayed graphic
Make zero point adjustment on PCE-DFG NF
Show settings window for static device data
Show settings window for dynamic device data
Select a language supported by the system
Show information window
Close program
6.4
Preparing the measurement
Introductory information
The language selected by the user when installing the logiciel is also offered by the logiciel as the
standard language.
If you want to use a language different from the one selected when installing the logiciel, you can
select it via the relevant icon
(“selection of a language supported by the system”) on the tool bar.
Before the PCE-DFG NF works in combination with the logiciel, you must set the assigned COM
port as well as the baud rate in the device as well as in the logiciel. This has to be done only once.
Note:
It is important that the baud rate
is the same in the PCE-DFG NF and in the logiciel.
The COM port and the baud rate for the logiciel can be set in the
Settings window for
static device data
.
In addition to the connection data, further settings like the date and time format and the number
of decimal places shown can be set in this window.
Establish connection to the PCE-DFG NF
The connection to the PCE-DFG NF can be established by clicking
on the relevant icon („Connect
with the PCE-DFG NF
“).
Summary of Contents for PCE-DFG NF 0,5K
Page 6: ...PCE Instruments 3 Fran ais...
Page 29: ...PCE Instruments 26 English...
