Manual
12
8 Maintain
8.1 Generally
1.
This durometer should avoid shock or heavy pressure and can’t be exposed to high-intensity
magnetic field, high humidity or oil environment.
2. Because the print paper is heat sensitive paper, the paper should avoid high temperature and
direct light. If the paper data need to be stored for long time, please make a copy in time.
3.
When there are any abnormalities, please don’t try to dissemble or adjust any fixed parts. You
should fill the warranty card and contact our maintenance department or maintenance agency
authorized by our company. Normally, the durometer will not stay in the maintenance department
over one week.
8.2 Recharging
The durometer will be recharged by the packaged charger. The durometer will not be auto power on
during recharging. The charging status will show in the measuring interface by hand power on. The
moving of the battery level icon line indicates it is charging now. If the icon is filled by all line, it means the
charging process is finished. If the power is low, the battery level icon will flash to prompt to be recharged
in time.
8.3 Reset
Durometer reset: If the software abnormal is happened, the durometer will reset automatically. Hardware
reset: The durometer can be reset by the hardware reset under the crash. The reset button is local in the
hole of the back shell.
9 Software
9.1 Installation
Start the installation by double-
clicking on the file „setup_vXX.exe“ and follow the instructions of the
installation wizard.
9.2 File upload
1. Connect the durometer to the PC via the mini USB cable.
2. In the
„Control Area“, select the COM port assigned by your PC and assign an index name in the
„Condition Area“ to be able to differentiate between several data records.
3. To be able to start the data upload, the upload mode has to be activated. To do so, click on the
„Upload Data To PC(U)“ button.
4.
Within the durometer menu, navigate to „Memory“, select „Upload Data“. Confirm your selection
with the
key on the device.
5. After a few seconds, the data will appear in the software.
