© PCE Instruments
12
7.8.3
Zero calibration
Prepare a calibration standard for zero calibration.
Navigate to the menu item "Zero calibration" as described in chapters 7.2 and 7.3 and open it.
Place the test instrument on the calibration standard as you would for a measurement. The meter
performs a few measurements and exits the calibration mode.
7.9
Error messages
Display
Cause
ERR1
Probe or base material defective
ERR2
Probe or base material defective
"----"
Unit not calibrated to the base material
-OL-
Coating too thick
8
Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms
9
Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
