Manual
8
5 Operation
5.1 Turn on the device
1. Make sure the battery is installed or the device is connected to an external power source.
2. Turn on the device by pressing the ON/OFF switch. After a few seconds, you are automatically
directed to the “Standard Measurement” screen. The default setting for this measuring mode is
L*a*b*C*h.
5.2 Take a measurement
When you turn on the device, you are directed
to the “Standard Measurement” screen. To take a
measurement, follow these steps:
1. Press and hold the testing button (see chapter 4.1). Next, a light cone appears to help you aim at
the measuring point.
2. Move the device as close to the measuring point as possible.
3. Release the testing button. The colorimeter now takes a measurement.
After the measuring procedure is finished, you can see the results on the following screen:
A reading which has been determined by using the “Standard Measurement” automatically serves as a
reference value.
