Manual
7
Installing the battery
1. Make sure that the colorimeter is turned off.
2. Open the cover of the battery compartment.
3. Insert the battery into the allocated space.
4. Close the cover of the battery compartment.
Charging the battery
The battery can only be charged when the colorimeter is connected to a PC or to the mains adaptor.
Note: If the battery is damaged, the device can still be used via an external power source (PC / mains
adaptor).
4.4 Change the measuring aperture
Installing the measuring aperture
To install the measuring aperture, first put it in the allocated space (see picture below). Now turn it
counter-clockwise until you hear a clicking sound. This means that the measuring aperture is now
attached properly.
Detaching the measuring aperture
To dismantle the measuring aperture, turn it clockwise until you hear a clicking noise. This means, it is
now detached.
