Manual
8
5
Operation
5.1
Turn on the device
1. Make sure the battery is installed or the device is connected to an external power source.
2.
Turn on the device by switching the On/Off button to “1”. After a few seconds, you are
automatically directed to the
“Standard Measurement” screen. The default setting for this
measuring mode is L*a*b*C*H.
5.2
Taking a measurement
If you turn on the device
, you are directed to the “Standard Measurement” screen. To take a
measurement, follow these steps:
1. Press and hold the testing button (see chapter 4.1). Next, 4 light cones appear to help you aim at
the measuring point.
2. Move the device as close to the measuring point as possible.
3. Release the testing button. The colorimeter now takes a measurement.
After the measuring process is finished, you can see the results in the following display:
