3
1. System Requirements
To use
UT803 Interface Program
, you need the following hardware and software:
An IBM PC or equivalent computer with 80486 or higher processor and 600 x 800 pixel or better monitor.
Microsoft Windows 95 or above.
At least 8MB of RAM.
At least 8MB free space in hard drive.
Can access to a local or a network CD-ROM.
A
free serial port.
A
mouse or other pointing device supported by Windows.
2. Installing hardware
UT803 support both RS232 and USB
Select the corresponding interface cable connecting to the UT803 and the computer
3. Installing UT803 Interface Program
To install UT803 Interface Program, please follow below procedure:
Before install the interface program, make sure that the computer is running the Window 95 or above operating
system.
1he installation of COM and USB is the same.
1.
-Double-click the My Computer icon from the Windows desktop.
-Locate the CD-ROM drive from the window; double-click the drive letter to display the folder of UT803.
-Double-click UT803 to display the contents of the folder.
-Double-click the file Setup.Exe.
2. Follow the on-screen installation instructions.
3. 1he installation program will create a DMM Interface Program folder.
You will be prompted to select the kind of Program Folder you want to install; you should select “UT803”.
4. Getting Started with UT803 Interface Program
To run the UT803 Interface Program, please do the followings:
4.1.
Insert the supplied RS232C or USB interface cable into the slot at the back of the Meter and properly connect
the other end of the cable to the port of computer.
4.2.
From the Windows
Start
menu, choose
Programs
>
DMM Interface Program
>
UT803
4.3.
Press
COM Connect or USB Connect
from menu bar to start the connection, the icon will be displayed.
5. Graphical Operations (see figure 1)
During the connection, you can select the following functions by clicking the corresponding icon:
Fill:
Click the box to select “fill-up graph” or unclick to select “line graph”.
Record:
Setting the number of record to show on graph.
Clear:
To clear all the graphics records permanently.
Save:
To save a file in BMP format. The default file name is C:\DA1A1.BMP”.
First:
Go to the first graphic.
Previous:
Go to the previous graphic.
Next:
Go to the next graphic.
Last:
Go to the last graphic.
Zoom In:
To enlarge part of the graphic.
