© PCE Instruments
2
2
Technicalspecifications
Frequency range
100 Hz
… 10 kHz
Volume
adjustable
Power
9V battery
Housing material
ABS
Operating temperature
-10 ... 55 °C / 14 ... 131 °F
Dimensions
206 x 50 x 32 mm / 8.11 x 1.9 x 1.2 in
Length of sensors (attachable)
1 mm x 290 mm; 1 mm x 70mm
0.04 in x 11.4 in ; 0.04 in x 2.8 in
Sensor material
Steel
Weight
240 g / 0.53 lbs with battery
3
Measurement
Open the battery compartment cover on the underside of the housing and insert the battery.
Now screw the required probe tip onto the device.
Insert the headphones at the bottom of the housing and put them on. Use the wheel on the outside
to switch on the instrument and adjust the volume. After switching on the instrument, the LED
indicator at the front lights up. Now hold the probe tip on the object to be tested.
Attention
:
Keep the probe and the headphone cable away from freely rotating objects to avoid accidents.
4
Battery replacement
1) Switch off the meter.
2) Remove the battery compartment cover.
2) Remove the old battery and insert the new battery (1 x 9 V block battery).
3) Close the battery compartment cover.
5
Contact
If you have any questions, suggestions or technical problems, please do not hesitate to contact
us. You will find the relevant contact information at the end of this user manual.
6
Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
