Manual
8
7 Data Logger
The meter can save max. 100 point data into the memory circuit
7.1 Save data
1) Turn on the meter.
2) Press the "REC Button" momentarily, shows "REC" on the display.
3) Press the "Logger Button" momentarily will save one measuring value to memory, display will
show :
4) To exit the memory data logger (record) function, press the "REC" button for 2 seconds at least.
The display will revert to the current reading, not show "REC"
7.2 Call data
1) Turn on the meter.
Press the "Hold Button" momentarily, LCD shows "HOLD".
Following, press the "REC Button" continuously until display shows following , then release the
button.
2)
Uses "▲ Button" or "▼ Button" to call the data that already saved into the memory.
Note : *During call the data, the " pH " unit will be flashed.
Press " Hold Button " ( 3-3. Fig. 1 ) will exit the data call function.
