4. PRECAUTIONS & PREPARATIONS FOR
MEASUREMENT
1)
Ensure that the batteries
are
connected correctly to
their
snap
terminal
s
and placed in the battery compartment.
2)
Select & push the correct Switch & button before marking
measurements
3)
Place the Test Lead into the proper input terminal before
marking measurements.
4)
Remove either of the test leads from the circuit under
test while changing the measurement function.
5)
Operate the instrument only in the ambient temperature
range of 0 to 50
( 32 to 122
℃
℉
) and less
than 80%Relative humidity.
6)
Do not exceed the maximum rated voltage of each range
and input terminal.
7)
Always switch the power to its " Off " position when the
instrument is not in use. Remove the batteries if not intend
to use the instrument for a long period of time.
5. MEASURING PROCEDURE
Caution :
* Do not apply the
overload voltage, current
to the input terminal !
10