Manual
www.industrial-needs.com
12
7
Maintenance and Cleaning
7.1
Change battery
Warning: To avoid incorrect measurements and any damages caused by that, please
charge the battery immediately when the battery symbol is indicated on the display.
To change the batteries, switch off the battery, remove the cover of the battery compartment at the
back of the device and change the batteries. Insert a 9 V bloc battery from the same model.
Reattach the cover of the battery compartment afterwards again.
7.2
How to use the adapter
The measurement device features side-wards a Port for an optional adapter (DC 9 V). If the device
is connected via an adapter to a power source, whilst the batteries are still inside the battery
compartment, the device will drain its power from the adapter, not the batteries. The adapter is
prioritized in that case.
7.3
Cleaning
Clean the device with a damp cloth made of cotton that makes no fluffs. If necessary, use a mild
cleaner. Do not use any abrasive detergent or chemical solution.
8
Disposal
Batteries may not be put in the household waste. They have to be given in the set up collection
points.
NOTE:
"This instrument doesn’t have ATEX protection, so it should not be used in potentially
explosive atmospheres (powder, flammable gases)."
Please contact PCE Instruments if you have any questions concerning our products, service etc.
Here you will find an overview of our measuring devices:
http://www.industrial-needs.com/measuring-instruments.htm
Here you will find an overview of our scales and balances:
http://www.industrial-needs.com/balances.htm
Here you will find an overview of our laboratory equipment:
http://www.industrial-needs.com/laboratory-equipment.htm
Here you will find an overview of our control systems:
http://www.industrial-needs.com/control-systems.htm
WEEE.-Reg.
–Nr.: DE69278128
To follow the WEEE guidelines (Waste of Electrical and Electronic Equipment) we take our devices and either recycle them or give
them to a recycling company.
