PCE Health and Fitness PCE-CT 80, User Manual

Page: 18 / 32

© PCE Instruments
15
Eng
li
s
h
2 Specifications
2.1 Technical specifications
Specifications of the meter PCE-CT 80
Specification Description
Measurement range Depending on sensor (see sensor chart)
Accuracy Depending on sensor (see sensor chart)
Resolution 0.1 µm (<100 µm)
1 µm (>100 µm)
Measurable materials Magnetic materials (iron, steel…)
Non-magnetic materials (paints, plastics, ceramics…)
Min. radius of curvature
convex
5 mm
Min. radius of curvature
concave
25 mm
Min. measuring surface Ø 17 mm
Min. coating thickness 0.2 mm (magnetic materials)
0.05 mm (non-magnetic materials)
Probe mode Automatic mode with material recognition (Fe + NFe)
Magnetic mode (Fe)
Eddy current (NFe)
Measure mode Single measurement
Calibration Multi-point calibration (1 … 4 points per group)
Zero-point calibration
Units µm / mm / mils
Data transfer Data transfer via USB 2.0
Memory One group of measurements (DIR mode) that is lost when meter
is turned off
Four groups of measurements with auto save and max. 2000
readings (GEN mode)
Note
: Each group of measurements has individual statistics,
alarm thresholds and calibration
Statistic functions Number of readings, mean value, minimum, maximum, standard
deviation
Alarm Indication when set upper and lower alarm thresholds are
exceeded or fallen below
Operating time Auto Power Off function
Power supply 3 x 1.5 V AAA batteries
Display 128 x 128 LCD
Displayed information Battery level
Fault detection
Operating conditions 0 °C… +50 °C
20 %... 90 % RH non-condensing
Storage conditions -10 °C… +60 °C
20 %... 90 % RH non-condensing
Dimensions 143 x 71 x 37 mm (L x W x H)
Weight incl. probe approx. 271 g