PCE Health and Fitness PCE-CLT 10, User Manual

Page: 10 / 16

© PCE Instruments
8
6.5.1 Pre-set cable types
The cable types pre-set in the PCE-CLT 10 are:
Network cable Coaxial cable
No. Name Producer No. Name Producer
1 CAT3UT HANWEI 1 CW1308 PE
2 CAT4UT HANWEI 2 CFPE50 FOAMED
3 CAT4ST DINTEK 3 CFPE75 FOAMED
4 CAT5UT DINTEK 4 CSPE50 SOLLD
5 CAT5ST SHIP 5 CSPE75 SOLLD
6 CAT6UT SHIP 6 ET9901 PVC
7 CAT6ST DINTEK 7 ET9903 PVC
8 CAT6ES DINTEK 8 IBME3 TELLON
9 CAT6EU DINTEK 9 IBME9 FOAMED
10 CAT7ST DINTEK 10 BT2002 FOAMED
11 CAT3UT NEXAN 11 COR50 AIR
12 CAT4UT NEXAN 12 COR75 AIR
13 CAT4ST NEXAN 13 COR550 AIRPE
14 CAT5UT IBDN 14 COR575 AIRPE
15 CAT5ST IBDN 15 RG6U FOAMED
16 CAT6UT IBDN 16 RG59BU VBFH
17 CAT6ST SIEMON 17 RG62AU PVC
18 CAT6ES SIEMON 18 TPPVC PVC
19 CAT6EU SIEMON 19 EPPE PE
20 CAT7ST SIEMON 20 BS6500 PP
6.5.2 Adding cables of known lengths
Each cable has its own VOP. If the VOP of the cable is unknown, it can be determined by making
a measurement. To do so, the cable length must be know.
To make a measurement, follow these steps:
First connect the cable to be measured. It is recommended to use a cable that is longer than 10
m. Now enter the menu. Select
“Velocity of propagation“. Then select “VOP Test“.