Hygro-Thermometer
10
8. After finish installing USB-120 connector driver, it
will install SE318 software automatically. it will
copy SE318.exe ( executable file ) and help file
to your hard disk ( default is c:\program
files\SE318.
9. After finish installation, plug USB-120 connector
to PC usb port, execute.
10.
”
start
”
”
My Computer
”, then choose “View
System Information
” on the left top of the window,
the window below will show up.
11. Choose
“
Hardware
” option and click “
Device Manager
” button, click “
+
” symbol on the left
side of Ports(COM &LPT), if the device
“
CP2101 USB to UART Bridge Controller(COMx)
”
is in the list, the connector is ready to work.
(5) Main menu and buttons:
Open
- Retrieve files from the disk
Save
- Save the present data to the disk
- Send data in the present table to the printer
Pause
- Stop data recording
Run
- Start data recording
Output To Graph
- Send tabular data to another graph
New
- Reset all the data
Option
- Setup dialog to set attributions of graph. (You can also double click on the graph.)
