5. DATALOGGER
5-1 Preparation before execute datalogger function
a.
Insert the SD card
Prepare a " SD memory card " ( 1 GB to 16 GB, optional ),
insert the SD card into the " SD card socket " ( 3-17, Fig. 1).
The front panel of the SD card should face against the
left
side plastic
case.
b.
SD card Format (Suggest using AC to DC Adapter)
If SD card just the first time use into the meter, it
recommend to make the " SD card Format " at first. ,
please refer chapter 7-6 ( page 18 ).
c.
Time setting
If the meter is used at first time, it should to adjust the
clock
time exactly, please refer chapter 7-1 ( page 15 ).
d.
Decimal format setting
The numerical data structure of SD card is
default used the " . " as the decimal, for
example "20.6" "1000.53" . But in certain
countries ( Europe ...) is used the " , " as the
decimal point, for example " 20, 6 "
"1000,53". Under such situation, it should
change the Decimal character at first, details
of setting the Decimal point, refer to Chapter
7-5, page 17.
5-2 Auto Datalogger ( Set sampling time
≧
5 seconds )
a. Start the datalogger
Pressing and holding the " ENTER Button ( 3-7, Fig. 1 ) > 2 seconds
, display is shown " LOGGER " , the " LOGGER " will flashing
10
