Manual
12
5.5.9 Factory Settings
Use the arrow to choose between
„Yes“
and „NO“.
Press ESC to save the settings and exit the
menu.
5.5.10 Units (°C / °F)
Use the arrow to choose between „°C“ and
„°F“.
Press ESC to save the settings and exit the
menu.
6 Cleaning
In order to clean the device, unscrew the standard head.
Now attach the zero filter and carry out a cumulative measurement in measurement mode. If the
measurement value is not 0 for one particle size, you must make measurements until all the values are
zero. The system is cleaned by the pumping. You can now re-attach the standard head.
