7
2. Insert the SIM card (3), install the battery (4) and attach the battery cover as shown (5).
(3)
(4)
（
5
）
Note: make sure that the metallic contacts of the battery are facing the metallic contacts in the battery slot.
Installing a microSD Card
1. The microSD card slot is on the right side of your phone.
2. With the metal contacts facing to the metal contacts in the slot, gently slide the SD card into the slot and press
down until the card locks into place (6).
Note: the metal contacts are facing front.
3. If you want to get the microSD card out, gently press the microSD card, then you can remove it from your
phone.
(6)
Charging the battery
You must fully charge the battery before using your phone for the first time.
1. Connect Charger cable to the micro charger port on the right of your phone.
2. Connect charger to an AC wall outlet.
When all the battery scroll bars are steady, the battery is fully charged. You can then disconnect the charger.
Switching the phone on and off
Press and hold the Power Key.
Notes:
1. You can also use the phone without SIM card. If the phone asks PIN code, key in the PIN code, and press the Left Soft
Key (LSK) to confirm.
2. Do not switch the phone on when the phone use is prohibited or when it may cause interference or danger.
Call Functions
This section gives you information about the calling service supported in your phone.
Making a call
In standby mode, key in the number, including the area code, and press the Dial Key.
To make a call from the Phonebook
