Mainboard User’s Manual
Standby Time Out
This sets the timeout for Standby mode in
minutes. If the time selected passes without any
system activity, the computer will enter power-
saving Standby mode.
Suspend Time Out
This sets the timeout for Suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter power-
saving Suspend mode.
Display Time Out
This sets the timeout for display device in minutes.
If the time selected passes without any display
activity, the display will enter power-saving mode.
Hard Disk Time
Out
This sets the timeout for hard disk in minutes. If
the time selected passes without any hard disk
activity, the disk will enter power-saving mode.
Ring On Power On
The system can be turned off with a software
command. If you enable this item, the system can
automatically resume if there is an incoming call
on the Fax/Modem. You must use an ATX power
supply in order to use this feature.
KeyBoard Power
On
If you enable this item, you can turn the system on
and off by pressing hot keys on the keyboard. You
must enable the Keyboard Power On jumper in
order to use this feature.
RTC Alarm Power
On / Date / Hour /
Minute / Second
The system can be turned off with a software
command. If you enable this item, the system can
automatically resume at a fixed time based on the
system’s RTC (realtime clock). Use the items
below this one to set the date and time of the
wake-up alarm. You must use an ATX power
supply in order to use this feature.
24
