3: BIOS Setup Utility
to save power.
MODEM Use IRQ
If you want an incoming call on a modem to
automatically resume the system from a power-
saving mode, use this item to specify the interrupt
request line (IRQ) that is used by the modem. You
might have to connect the fax/modem to the
mainboard Wake On Modem connector for this
feature to work.
Soft-Off by
PWRBTN
Under ACPI (Advanced Configuration and Power
management Interface) you can create a software
power down. In a software power down, the
system can be resumed by Wake Up Alarms. This
item lets you install a software power down that is
controlled by the normal power button on your
system. If the item is set to Instant-Off, then the
power button causes a software power down. If
the item is set to “Delay 4 Sec.” then you have to
hold the power button down for four seconds to
cause a software power down.
Wake Up Events
This item opens a submenu that enables you to
set events that will resume the system from a
power saving mode. Select Wake Up Events and
press
Enter
to display the following items: VGA,
LPT & COM, HDD & FDD, PCI Master, PowerOn
by PCI Card, Wake Up On LAN/Ring, RTC Alarm
Resume, Primary INTR, and IRQs Activity
Monitoring.
33
