Install the Mainboard
1. On the mainboard, locate the J1 SPDIF header for this bracket.
2. Plug the cable from the bracket into the J1 SPDIF header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Internal Digital Audio
Perhaps you have an optional internal digital audio cable, you can
also use it to connect the digital audio output connector of a CD-
ROM or DVD drive to the pins 5-6 of J1.
Install Other Devices
Install and connect any other devices in the system following the
steps below.
Floppy Disk Drive
The mainboard ships with a floppy disk drive cable that can
support one or two drives. Drives can be 3.5” or 5.25” wide, with
capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB.
21
1
J1-SPDIF Header
SPDIF Out
Optic Out
Optic In
SPDIF In
Aux In
Optic Module
Extension Bracket
