2: Mainboard Installation
Install Other Devices
Follow these steps below to install and connect other devices in the
system.
Floppy Disk Drive
The mainboard ships with a floppy disk drive cable that can
support one or two drives. Drives can be 3.5” or 5.25” wide, with
capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB.
Install your drives and connect power from the system power
supply. Use the enclosed cable to connect the drives to the floppy
disk drive header
FLOPPY
.
IDE Devices
IDE devices include hard disk drives, high-density diskette drives,
and CD-ROM or DVD-ROM drives, among others.
The mainboard ships with an IDE cable that can support one or
two IDE devices. If you connect two devices to one single cable,
you must configure one of the drives as Master and the other as
Slave. The documentation of the IDE device will tell you how to
configure the device as a Master or Slave device. The Master
device connects to the end of the cable.
Install the device(s) and connect power from the system power
supply. Use the enclosed cable to connect the device(s) to the
Primary IDE channel connector
IDE1
on the mainboard.
17
IDE1
1
1
IDE2
FLOPPY
1
Summary of Contents for M758 Plus Series
Page 4: ...Mainboard User s Manual IV...
Page 26: ...Mainboard User s Manual 22...
