8
Chapter 2
Step 2:
There are 2 sets of small holes along Slot 1 of your
mother board: two on the top and two on the bottom.
Snap the retention clip (2) right into those 2 sets of holes
Slot 1
Item 2
PW2
If the retention clip is installed incorrectly, you will not
be able to insert the retention clip into the CPU and in
this situation you might need to rotate the retention clip
by 180¡.
Step 3:
Find the hole in each corner of the retention clip then
insert the 4 screws from the top of the motherboard.
Holes for screws
Summary of Contents for M717
Page 4: ......
