27
IRQ3(COM2/COM4); When set to Monitor, these options enable
IRQ4(COM1/COM3); the event monitoring on the specified
IRQ5 (LPT2);IRQ7
hardware interrupt request line. If set to
(LPT1);IRQ9; IRQ10; Monitor and the computer is in a power
IRQ11; IRQ12 (PS2
saving state, BIOS watches for any
Mouse);IRQ13(Math
activities on the specified IRQ line. The
Coprocessor);IRQ14; computer will enter the full on power
IRQ15
state if any activity occurs.
Ring Resume From Set this option to enable the Modem Ring to
Soft Off
wake up the system which is in the Green
mode.
PCI/PnP Setup
Choose the PCI/Plug and Play Setup from the BIOSSetup
main menu.
Plug and Play
Set this option to Yes if the operation system
Aware OS
in this computer is aware of and follows the
Plug and Play specification. Currently, only
Windows 95/98 are PnP-aware.
Clear NVRAM
Set this option to Yes to clear NVRAM.
PCI Latency TimerThis option specifies the latency timings (in
PCI clocks) for all PCI devices on the PCI bus.
PCI VGA Palette
When this option is set to Enabled, multiple
Snoop
VGA devices operating on different buses can
handle data from the CPU on each set of
palette registers on every video device.
PCI IDE Bus
Set this option to Enabled bus master for the
Master
PCI IDE.
BIOS Setup
