Model Number
5302D-01A
TORKDISC® ROTARY TORQUE SENSING SYSTEM
Revision: A
ECN #: 38172
[10]
Performance
ENGLISH
SI
Measurement Range(Full Scale Capacity)
2000 in-lb
226 N-m
Accuracy
± 0.10 % FS
± 0.10 % FS
[3]
Frequency Range(-3 dB)
0 to 8500 Hz
0 to 8500 Hz
Filter Type(High Pass)
2-pole
Butterworth
2-pole
Butterworth
[4][5]
Filter Type
(Low Pass - Anti Alias)
8-pole Elliptical
8-pole Elliptical
Voltage Output(channel A - AC coupled)
± 10 V
± 10 V
Voltage Output
(channel B - DC coupled)
± 10 V
± 10 V
Gain(Channel A)
1-16 dB
1-16 dB
Gain
(Channel B)
0.3-1.3 dB
0.3-1.3 dB
Digital Output
QSPI
QSPI
[6]
Maximum Load(Axial)
500 lb
2.2 kN
[7][8][9]
Maximum Load
(Lateral)
500 lb
2.2 kN
[7][8][9]
Maximum Moment
1500 in-lb
169 N-m
[7][8][9]
Environmental
Overload Limit(Bolt Joint Slip)
3300 in-lb
373 N-m
[2]
Overload Limit
(Failure)
8000 in-lb
904 N-m
Overload Limit
(Safe)
6000 in-lb
678 N-m
Temperature Range(Rotor/Stator - Operating)
+32 to +185 °F
0 to +85 °C
Temperature Range
(Rotor - Compensated)
+70 to +170 °F
+21 to +77 °C
Temperature Range
(Receiver - Operating)
0 to +122 °F
-17.7 to 50 °C
Temperature Effect on Output(System - within compensated range)
0.002 %FS/°F
0.0036 %FS/°C
Temperature Effect on Zero Balance(System - within compensated range) 0.002 %FS/°F
0.0036 %FS/°C
Position Sensitivity(180° rotation of sensor)
≤
0.1 % FS
≤
0.1 % FS
Electrical
Power Required(50 to 60 Hz)
9 to 18 VDC
9 to 18 VDC
[1]
Digital Resolution
16 Bit
16 Bit
Digital Sample Rate
26,484
samples/sec
26,484
samples/sec
Analog Resolution(based on ±10 V FSO and 16-bit resolution)
0.31 mV
0.31 mV
Physical
Maximum Speed
15,000 RPM
15,000 RPM
Permissible Axial Float(rotor to stator)
0.25 in
6.4 mm
Permissible Radial Float(rotor to stator)
0.25 in
6.4 mm
Rotating Inertia(without adaptors)
0.056 in-
lb/sec2
0.006 N-
m/sec2
Dynamic Balance
per ISO G 2.5
per ISO G 2.5
Torsional Stiffness
5800 kin-
lb/radian
655.312 kN-
m/radian
Torsional Angle(at Full Scale Capacity)
0.020 °
0.020 °
Housing Material(Sensor)
Anodized
Aluminum
Anodized
Aluminum
Weight(rotor/sensor)
3.5 lb
1.6 kg
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1]
Supplied with universal AC power adaptor.
[2]
Bolt joint slip torque is calculated assuming a coefficient of friction (µ) of 0.1 and that grade 8
socket head cap screws are used and tightened to 30% of yield.
[3]
Root sum square of non-linearity, hysteresis, and non repeatability.
[4]
Selectable High Pass cutoff frequencies of 5, 10, 20, 200 and 500 Hz.
[5]
Selectable Low Pass cutoff frequencies of 10,000, 5000, 2500, 1200, 625 and 313 Hz.
[6]
Request Technical Note FTQ-STN5 regarding digital output signal.
[7]
Extraneous load limits reflect the maximum axial load, lateral load, and bending moment
that may be applied singularly without electrical or mechanical damage to the sensor.
[8]
Where combined extraneous loads are applied, decrease loads proportionally.
[9]
Request Application Note AP-1015 regarding the effects of extraneous loads on the torque
sensor output.
[10] See PCB Declaration of Conformance PS069 for details.
SUPPLIED ACCESSORIES:
Model 012AC024AT Cable (1)
Model 182-028A Connector (1)
Model M0003978 Power supply (1)
Entered: DMW
Engineer: JM
Sales: RR
Approved: GLB
Spec Number:
Date: 1/10/2012
Date: 1/10/2012
Date: 1/10/2012
Date: 1/10/2012
40425
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: [email protected]
Web site: http://www.pcbloadtorque.com
