PCB Piezotronics Tourmaline ICP 134A24, Installation And Operating Manual

Page: 23 / 30

Model Number
134A 24
PRESSURE SENSOR, ICP®
Revision: J
ECN #: 52882
P erfo rm an ce EN G L ISH SI
Measurement Range(for ±5V output) 1,000 psi 6,895 kPa
Useful Overrange(for ± 10V output) 2,000 psi 13,790 kPa [1]
Sensitivity(± 15 %) 5 mV/psi 0.73 mV/kPa [2]
Maximum Pressure(static) 15,000 psi 103,425 kPa
Resolution 0.02 psi 0.14 kPa
Resonant Frequency ≥ 1,500 kHz ≥ 1,500 kHz
Rise Time(Reflected) ≤ 0.2 µ sec ≤ 0.2 µ sec
Low Frequency Response(- 5 %) 0.25 Hz 0.25 Hz
Non-Linearity ≤ 2 % FS ≤ 2 % FS [3]
En viro n m en tal
Temperature Range(Operating) -32 to +120 °F -36 to +49 °C
Maximum Flash Temperature 5,000 °F 2,760 °C
Electrical
Output Polarity(Positive Pressure) Positive Positive
Discharge Time Constant(at room temp) ≥ 1 sec ≥ 1 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 100 Ohm ≤ 100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
P h ysical
Sensing Element Tourmaline Tourmaline
Housing Material Stainless Steel Stainless Steel
Diaphragm Epoxy Epoxy
Sealing Epoxy Epoxy
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 1.4 oz 39 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M - Metric Mount
N
- Negative Output Polarity
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be
limited by output bias.
[2]Calibrated as a system using (3 inch) type 003 cable and 402A series in-line amplifier.
[3]Zero-based, least-squares, straight line method.
Date: 06/03/2022 Date: 06/03/2022 Date: 06/03/2022 Date: 06/03/2022 6616
Entered: ND Engineer: RPF Sales: MV Approved: BAM Spec Number:
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
3425 Walden Avenue, Depew, NY 14043
SU P P L IED A C C ESSORIES:
Model 061A30 Spanner Wrench, 2 Pin (1)