Model Number
216B
Revision: J
ECN #: 50917
P erfo rm an ce
EN G L ISH
SI
Sensitivity(± 15 %)
18 pC/lb
4,047 pC/kN
Measurement Range(Compression)
≤ 80,000 lb
≤ 355.86 kN
Maximum Static Force(Compression)
90,000 lb
400.32 kN
Upper Frequency Limit
40 kHz
40 kHz
[1][2]
Non-Linearity
≤ 1.25 % FS
≤ 1.25 % FS
[3]
En viro n m en tal
Temperature Range
-100 to +400 °F
-73 to +204 °C
Temperature Coefficient of Sensitivity
≤ 0.03 %/°F
≤ 0.054 %/°C
Electrical
Capacitance
80 pF
80 pF
[4]
Insulation Resistance
≥ 1E12
≥ 1E12
Output Polarity(Compression)
Negative
Negative
P h ysical
Preload
16,000 lb
71.172 kN
Stiffness
74 lb/µin
13 kN/µm
[4]
Size (Diameter x Height x Bolt Diameter x
Sensing Surface)
2.05 in x 0.590 in x 1 in x 1.750
in
52.9 mm x 15 mm x 26 mm x
44.5 mm
Size - ID(Hole Diameter)
1.025 in
26.04 mm
Size - OD(Sensor)
2.05 in
52 mm
Weight
5.48 oz
155 gm
Housing Material
Stainless Steel
Stainless Steel
Sealing
Hermetic
Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Side
Side
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M
- Metric Mount
Supplied Accessory: Model 080A82 Assembly Lubricant
Supplied Accessory: Model 082B06 Anti-Friction Washer
Supplied Accessory: Model M081A16 Mounting Stud, M22 x 2.00 x 1.900, BeCu
Supplied Accessory: Model M083B06 Pilot Bushing
P
- Positive Output Polarity
Output Polarity(Compression)
Positive
Positive
W
- Water Resistant Cable
Electrical Connector
Molded Integral Cable
Molded Integral Cable
Electrical Connection Position
Side
Side
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Estimated using rigid body dynamics calculations.
[2]Low frequency response and system noise dependent on choice of external signal conditioning
electronics.
[3]Zero-based, least-squares, straight line method.
[4]Typical.
Date: 07/13/2020
Date: 07/13/2020
Date: 07/13/2020
Date: 07/13/2020
216-2010-80
Entered: LK
Engineer: MJK
Sales: KWW
Approved: RPF
Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
SU P P L IED A C C ESSORIES:
Model 080A82 Assembly Lubricant
Model 081A16 Mounting Stud, 7/8-14 x 1.900, BeCu
Model 082B06 Anti-Friction Washer
Model 083B06 Pilot bushing (for Models 206C and 216B)
