INDUSTRIAL MONITORING INSTRUMENTATION DIVISION
PAGE
6
SENSO
RS AN
D INS
TRUME
N
TATIO
N F
OR MAC
HINE
CON
DITION M
ONIT
ORIN
G
Output Wiring
Using the Enclosure
When collecting data from the enclosure using the BNC and/or MIL connectors and a data collector, connect the
data’s collector connector to its appropriate connector mate in the box and modulate the switch to the appropriate
channel. If the output terminals are not being used, then the data collector must provide power for the sensor in
order to for a signal to be obtained. If the output terminals are being used, then the sensor is already being
powered and the data collector does not need to provide power.
Calibrating the Enclosure
The models do not require calibration. If there are any questions concerning the products, please contact the
factory.