PCB Piezotronics IMI Sensors 66333PPZ2, Installation And Operating Manual

Page: 6 / 7

Model Number
66333P P Z 2
3-WIRE TO-8 ACCELEROMETER
Revision: A
ECN #: 52695
P erfo rm an ce EN G L ISH SI
Sensitivity(± 20 %) 1,000 mV/g 102 mV/(m/s²) [1][2]
Measurement Range ± 2 g ± 20 m/s² [3]
Frequency Range(± 3 dB) 0.5 to 5k Hz 0.5 to 5k Hz [4][5]
Resonant Frequency > 16 kHz > 16 kHz [5]
Broadband Resolution 0.00104 g rms 0.010202 m/s² rms [6]
Non-Linearity ≤ 1 % ≤ 1 % [7]
Transverse Sensitivity ≤ 7 % ≤ 7 %
En viro n m en tal
Overload Limit(Shock) 5,000 g pk 49k m/s² pk
Temperature Range(Operating) -65 to 185 °F -54 to 85 °C
Temperature Response See Graph See Graph [6]
Electrical
Settling Time(within 1% of bias) < 3 sec < 3 sec [6]
Discharge Time Constant ≥ 0.4 sec ≥ 0.4 sec
Excitation Voltage 3 to 12 VDC 3 to 12 VDC
Output Impedance < 100 Ohm < 100 Ohm
Current Draw 0.75 mA 0.75 mA
Output Bias Voltage 0.5 x Excitation Voltage 0.5 x Excitation Voltage
Spectral Noise(10 Hz) 39 µg/√Hz
383 (µm/sec
2
)/√Hz
[6]
Spectral Noise (100 Hz) 15 µg/√Hz
147 (µm/sec
2
)/√Hz
[6]
Spectral Noise (1 kHz) 9 µg/√Hz
88 (µm/sec
2
)/√Hz
[6]
P h ysical
Size (Diameter x Height) 0.64 in x 0.57 in 16.3 mm x 14.5 mm
Weight 0.88 oz 25 gm
Mounting Adhesive Adhesive
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Bottom Bottom
Cable Termination Blunt cut Blunt cut
Electrical Connections(White) Output Output
Electrical Connections (Black) Neg (-) Ground Neg (-) Ground
Electrical Connections (Red) Pos (+) VDC Pos (+) VDC
Cable Length 1 ft 0.3 m
Cable Type PVC PVC
[8]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
HT - High temperature, extends normal operation
temperatures
Temperature Range -65 to 250 °F -54 to 121 °C
Cable Type 010 010
RH
- RoHS Compliant
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Conversion Factor 1g = 9.81 m/s².
[2]Positive output along Z-axis (in upward direction when pin mounted).
[3]Measurement range achieved is dependent upon excitation voltage.
[4]The high frequency tolerance is accurate within ±10% of the specified frequency.
[5]Performance depends on mounting
[6]Typical.
[7]Zero-based, least-squares, straight line method.
[8]See PCB Declaration of Conformance PS198
Date: 05/24/2022 Date: 05/24/2022 Date: 05/24/2022 Date: 05/24/2022 58873
Entered: ND Engineer: GD Sales: JL Approved: BAM Spec Number:
Phone: 800-959-4464
Fax: 716-684-3823
E-Mail: imi@pcb.com
3425 Walden Avenue, Depew, NY 14043
SU P P L IED A C C ESSORIES:
Model ICS-2 NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for
each axis (1)