PCB Piezotronics IMI Sensors 604B32, Installation And Operating Manual

Page: 18 / 19

Model Number
604B32
INDUSTRIAL ICP® ACCELEROMETER
Revision: NR
ECN #: 44689
Performance ENGLISH SI
Sensitivity(± 20 %) 500 mV/g 51 mV/(m/s²) [2]
Measurement Range ± 10 g ± 98 m/s²
Frequency Range(± 3 dB) 30 to 180,000 cpm .5 to 3000 Hz [3]
Resonant Frequency 600 kcpm 10 kHz [1]
Broadband Resolution(1 to 10,000 Hz) 150 µg
1471 µm/sec
2
[1]
Non-Linearity ± 1 % ± 1 % [4]
Transverse Sensitivity ≤ 5 % ≤ 5 %
Environmental
Overload Limit(Shock) 5000 g pk 49,050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph See Graph [1]
Enclosure Rating IP68 IP68
Electrical
Settling Time(within 1% of bias) ≤ 5.0 sec ≤ 5.0 sec
Discharge Time Constant ≥ 0.3 sec ≥ 0.3 sec
Excitation Voltage 18 to 28 VDC 18 to 28 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <500 Ohm <500 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Spectral Noise(10 Hz) 8 µg/ √ Hz
78.5 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (100 Hz) 3 µg/ √ Hz
29.4 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (1 kHz) 3 µg/ √ Hz
29.4 (µm/sec
2
)/ √ Hz
[1]
Electrical Isolation(Case)
>10
8
Ohm >10
8
Ohm
Physical
Size (Diameter x Height) 1.38 in x 1.00 in 34.9 mm x 25.4 mm
Weight(without cable) 4.4 oz 124.7 gm
Mounting Thread 1/4-28 UNF 1/4-28 UNF [5]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 4-Pin MIL-C-26482 4-Pin MIL-C-26482
Electrical Connection Position Side Side
Electrical Connections(Pin A) X axis X axis
Electrical Connections (Pin B) Y axis Y axis
Electrical Connections (Pin C) Z axis Z axis
Electrical Connections (Pin D) Ground Ground
[6]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
M
- Metric Mount
Supplied Accessory : Model M081A68 Captive mounting bolt M6 x 1 (1) replaces Model 081A68
NOTES:
[1]Typical.
[2]Conversion Factor 1g = 9.81 m/s².
[3]The high frequency tolerance is accurate within ±10% of the specified frequency.
[4]Zero-based, least-squares, straight line method.
[5]1/4-28 has no equivalent in S.I. units.
[6]See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 081A68 Captive mounting bolt 1/4-28 x .90" (1)
Model ACS-2T NIST Traceable Single Point Calibration at 100 Hz for Each Axis (1)
3425 Walden Avenue, Depew, NY 14043
Phone: 800-959-4464
Fax: 716-684-3823
E-Mail: imi@pcb.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: LK Engineer: AF Sales: EGY Approved: BAM Spec Number:
Date: 10/14/2015 Date: 10/14/2015 Date: 10/14/2015 Date: 10/14/2015
62760