PCB Piezotronics ICP 482M179, Installation And Operating Manual, Page: 36 / 37

Model Number
483C50
ICP® SENSOR SIGNAL CONDITIONER
Revision: H
ECN #: 45020
Performance ENGLISH SI
Channels 8 8
Sensor Input Type(s) ICP®, Voltage ICP®, Voltage
Voltage Gain x0.1 to x200 x0.1 to x200
Voltage Gain Increment 0.1 0.1
Accuracy(Gain, x0.1 to x0.4) ± 5 % ± 5 %
Accuracy(Gain, x0.5 to x200) ± 1 % ± 1 %
Low Frequency Response(-5 %) ≤ 0.05 Hz ≤ 0.05 Hz
High Frequency Response(-3 dB) >100 kHz >100 kHz
High Frequency Response(-3 dB) >80 kHz >80 kHz
Phase Response(at 1 kHz) ± 2 ° ± 2 °
Non-Linearity 1 % 1 %
Cross Talk <72 dB <72 dB
TEDS Sensor Support Yes Yes
Fault/Bias Monitor/Meter(LED) Open/Short/Overload Open/Short/Overload
Control Interface
Digital Control Interface Ethernet Ethernet
Environmental
Temperature Range(Operating) +32 to +120 °F 0 to +50 °C
Electrical
Power Required(direct input to unit) AC Power AC Power
AC Power(47 to 63 Hz) 100 to 240 VAC 100 to 240 VAC
AC Power ≤ 0.7 Amps ≤ 0.7 Amps
Excitation Voltage(To Sensor) >24 VDC >24 VDC
DC Offset <50 mV <50 mV
Constant Current Excitation(To Sensor)(Non-Isolated Mode) 2 to 20 mA 2 to 20 mA [1]
Output Impedance <50 Ohm <50 Ohm
Overload Threshold(± 0.5 Vpk) ± 10 Vpk ± 10 Vpk
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x1) 50.0 µV/rms 50.0 µV/rms [2]
Spectral Noise(1 Hz) 8.0 µV/ √ Hz 8.0 µV/ √ Hz [2]
Spectral Noise(10 Hz) 1.5 µV/ √ Hz 1.5 µV/ √ Hz [2]
Spectral Noise(100 Hz) 1.0 µV/ √ Hz 1.0 µV/ √ Hz [2]
Spectral Noise(1 kHz) 1.0 µV/ √ Hz 1.0 µV/ √ Hz [2]
Spectral Noise(10 kHz) 1.0 µV/ √ Hz 1.0 µV/ √ Hz [2]
Broadband Electrical Noise(1 to 10,000 kHz)(Gain x10) 75.0 µV rms 75.0 µV rms [2]
Spectral Noise(1 Hz) 20.0 µV/ √ Hz 20.0 µV/ √ Hz [2]
Spectral Noise(10 Hz) 1.5 µV/ √ Hz 1.5 µV/ √ Hz [2]
Spectral Noise(100 Hz) 1.0 µV/ √ Hz 1.0 µV/ √ Hz [2]
Spectral Noise(1 kHz) 1.0 µV/ √ Hz 1.0 µV/ √ Hz [2]
Spectral Noise(10 kHz) 1.0 µV/ √ Hz 1.0 µV/ √ Hz [2]
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x100) 350 µV rms 350 µV rms [2]
Spectral Noise(1 Hz) 100.0 µV/ √ Hz 100.0 µV/ √ Hz [2]
Spectral Noise(10 Hz) 10.0 µV/ √ Hz 10.0 µV/ √ Hz [2]
Spectral Noise(100 Hz) 8.0 µV/ √ Hz 8.0 µV/ √ Hz [2]
Spectral Noise(1 kHz) 6.0 µV/ √ Hz 6.0 µV/ √ Hz [2]
Spectral Noise(10 kHz) 6.0 µV/ √ Hz 6.0 µV/ √ Hz [2]
Physical
Electrical Connector(ICP® Sensor Input) BNC Jack BNC Jack
Electrical Connector(Output) BNC Jack BNC Jack
Electrical Connector(Ethernet) RJ-45 RJ-45
Size (Height x Width x Depth)(nominal) 1.75 in x 19 in x 13.7
in
44.5 mm x 482.6 mm x 348
mm
Weight 7 lb 3.18 kg
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
NOTES:
[1]User adjustable, factory set at 4 mA (± 0.5 mA).
[2]Typical.
[3]See PCB Declaration of Conformance PS024 for details.
SUPPLIED ACCESSORIES:
Model 017AXX Power Cord (1)
Model EE75 PCB MCSC Control Software. (1)
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
[3]
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: LK Engineer: CPH Sales: ML Approved: ECB Spec Number:
Date: 1/20/2016 Date: 1/20/2016 Date: 1/20/2016 Date: 1/20/2016
40475