Model Number
356B10
TRIAXIAL ICP® ACCELEROMETER
Revision: E
ECN #: 42197
Performance
ENGLISH
SI
Sensitivity(± 20 %)
1.0 mV/g
0.1 mV/(m/s²)
Measurement Range
± 5000 g pk
± 49,050 m/s² pk
Frequency Range(± 5 %)(y or z axis)
2 to 10,000 Hz
2 to 10,000 Hz
Frequency Range
(± 5 %)(x axis)
2 to 7000 Hz
2 to 7000 Hz
[3][3][3][3]
Resonant Frequency
≥
55 kHz
≥
55 kHz
Broadband Resolution(1 to 10,000 Hz)
0.03 g rms
0.29 m/s² rms
[1]
Non-Linearity
≤
2.5 %
≤
2.5 %
[4]
Transverse Sensitivity
≤
5 %
≤
5 %
Environmental
Overload Limit(Shock)
± 7000 g pk
± 68,600 m/s² pk
Temperature Range(Operating)
-65 to +250 °F
-54 to +121 °C
Temperature Response
See Graph
See Graph
[2]
Electrical
Excitation Voltage
18 to 30 VDC
18 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
200 Ohm
≤
200 Ohm
Output Bias Voltage
7 to 12 VDC
7 to 12 VDC
Discharge Time Constant
2.5 to 4.5 sec
2.5 to 4.5 sec
Settling Time(within 10% of bias)
<12 sec
<12 sec
Spectral Noise(1 Hz)
9000 µg/
√
Hz
88,290 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(10 Hz)
2500 µg/
√
Hz
24,525 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(100 Hz)
800 µg/
√
Hz
7848 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(1 kHz)
250 µg/
√
Hz
2453 (µm/sec
2
)/
√
Hz
[1]
Physical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Height x Length x Width)
0.4 in x 0.4 in x 0.4 in
10.2 mm x 10.2 mm x 10.2 mm
Weight(without cable)
0.14 oz
4 gm
[1]
Electrical Connector
Integral Cable
Integral Cable
Electrical Connection Position
Side
Side
Cable Termination
1/4-28 4-Pin Jack
1/4-28 4-Pin Jack
Cable Length
5 ft
1.5 m
Cable Type
034 4-cond Shielded
034 4-cond Shielded
Mounting Thread
5-40 Female
5-40 Female
Mounting Torque
4 to 5 in-lb
45 to 56 N-cm
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
HT
- High temperature, extends normal operation temperatures
Temperature Range(Operating)
-65 to +325 °F
-54 to +163 °C
NOTES:
[1] Typical.
[2] 250° F to 325° F data valid with HT option only.
[3] X-axis frequency response is limited due to mounting method.
[4] Zero-based, least-squares, straight line method.
[5] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 034G05 4-cond. shielded cable, 5 ft (1.5M), 4-pin plug to (3) BNC plugs (1)
Model 080A Adhesive Mounting Base (1)
Model 080A109 Petro Wax (1)
Model 081A27 Mounting Stud (5-40 to 5-40) (1)
Model 081A90 Mounting stud, 10-32 to 5-40 (1)
Model ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1)
Model M081A27 Metric mounting stud, 5-40 to M3 x 0.50 long (1)
Entered: AP
Engineer: JJB
Sales: WDC
Approved: JJB
Spec Number:
Date: 11/8/2013
Date: 11/8/2013
Date: 11/8/2013
Date: 11/8/2013
20531
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
