PCB Piezotronics 357B22, Installation And Operating Manual

Page: 13 / 15

Model Number
357B22
CHARGE OUTPUT ACCELEROMETER
Revision: N
ECN #: 46956
Performance ENGLISH SI
Sensitivity(± 15 %) 30 pC/g 3.1 pC/(m/s²)
Measurement Range ± 1500 g pk ± 14,700 m/s² pk
Frequency Range(+5 %) 6 kHz 6 kHz
[2]
Frequency Range (+10 %) 7.5 kHz 7.5 kHz
[2]
Frequency Range (+3 dB) 8.5 kHz 8.5 kHz
[2]
Resonant Frequency ≥ 23 kHz ≥ 23 kHz
Non-Linearity(600 g, 5890 m/s²) ≤ 1 % ≤ 1 %
[3]
Non-Linearity ≤ 3 % ≤ 3 %
[3]
Transverse Sensitivity ≤ 5 % ≤ 5 %
Environmental
Overload Limit(Shock) ± 6000 g pk ± 58,860 m/s² pk
Temperature Range -95 to +500 °F -71 to +260 °C
Temperature Response See Graph See Graph
[1]
Base Strain Sensitivity 0.0006 g/µ ε 0.006 (m/s²)/µ ε
[1]
Electrical
Capacitance 930 pF 930 pF
[1]
Insulation Resistance(at 500°F)
≥ 10
8
Ohm ≥ 10
8
Ohm
[1]
Insulation Resistance (at 70° F [21°C])
≥ 10
12
Ohm ≥ 10
12
Ohm
Output Polarity Negative Negative
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size (Hex x Height) 5/8 in x 1.16 in 5/8 in x 29.3 mm
Weight 0.73 oz 21 gm
[1]
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Top Top
Mounting Thread 10-32 Female 10-32 Female
[4]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
J
- Ground Isolated
Frequency Range(+5 %) 4 kHz 4 kHz
Frequency Range (+10 %) 5 kHz 5 kHz
Resonant Frequency ≥ 17 kHz ≥ 17 kHz
Electrical Isolation(Base)
>10
8
Ohm >10
8
Ohm
Size - Hex x Height 0.625 in x 1.21 in 15.9 mm x 30.6 mm
P
- Positive Output Polarity
Output Polarity Positive Positive
W
- Water Resistant Cable
Electrical Connector Sealed Integral Cable Sealed Integral Cable
Electrical Connection Position Top Top
NOTES:
[1] Typical.
[2] Low frequency response is determined by external signal conditioning electronics.
[3] Zero-based, least-squares, straight line method.
[4] See PCB Declaration of Conformance PS160 for details.
SUPPLIED ACCESSORIES:
Model 080A109 Petro Wax (1)
Model 081B05 Mounting Stud (10-32 to 10-32) (1)
Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point). (1)
Model M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
Entered: LK Engineer: BAM Sales: WDC Approved: BAM Spec Number:
Date: 8/8/2017 Date: 8/8/2017 Date: 8/8/2017 Date: 8/8/2017
357-2220-80
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com