Model Number
354C10
TRIAXIAL ICP® ACCELEROMETER
Revision: G
ECN #: 42197
Performance
ENGLISH
SI
Sensitivity(± 15 %)
10 mV/g
1.02 mV/(m/s²)
Measurement Range
± 500 g pk
± 4905 m/s² pk
Frequency Range(± 5)
2 to 8000 Hz
2 to 8000 Hz
Resonant Frequency
≥
40 kHz
≥
40 kHz
Broadband Resolution(1 to 10,000 Hz)
0.003 g rms
0.03 m/s² rms
[1]
Non-Linearity
≤
1 %
≤
1 %
[3]
Transverse Sensitivity
≤
5 %
≤
5 %
Environmental
Overload Limit(Shock)
± 10,000 g pk
± 98,100 m/s² pk
Temperature Range
-65 to +250 °F
-54 to +121 °C
[2]
Temperature Response
See Graph
See Graph
Electrical
Excitation Voltage
18 to 30 VDC
18 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
200 Ohm
≤
200 Ohm
Output Bias Voltage
7 to 12 VDC
7 to 12 VDC
Discharge Time Constant
0.3 to 1.0 sec
0.3 to 1.0 sec
Settling Time(within 10% of bias)
<3 sec
<3 sec
Spectral Noise(1 Hz)
1000 µg/
√
Hz
9810 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(10 Hz)
300 µg/
√
Hz
2943 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(100 Hz)
80 µg/
√
Hz
785 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(1 kHz)
25 µg/
√
Hz
308 (µm/sec
2
)/
√
Hz
[1]
Electrical Isolation
>10
8
Ohm
>10
8
Ohm
Physical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Height x Length x Width)
0.30 in x 0.55 in x 0.55 in
7.6 mm x 14.0 mm x 14.0 mm
Weight(without cable)
0.18 oz
5.0 gm
[1]
Electrical Connector
1/4-28 4-Pin
1/4-28 4-Pin
Electrical Connection Position
Side
Side
Cable Length
5 ft
1.5 m
Cable Type
034 4-cond Shielded
034 4-cond Shielded
Mounting
Through Hole
Through Hole
[4]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
HT
- High temperature, extends normal operation temperatures
Temperature Range(Operating)
-65 to 325 °F
-54 to 163 °C
M
- Metric Mount
Supplied Accessory : Model M039A22 Allen wrench for use with M3 thread (1) replaces Model
039A21
Supplied Accessory : Model M081B93 Insulated cap screw, M3x0.5 thd x 1/2" long (for Model
M354C10) (1) replaces Model 081B93
NOTES:
[1] Typical.
[2] 250° F to 325° F data valid with HT option only.
[3] Zero-based, least-squares, straight line method.
[4] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 034G05 4-cond. shielded cable, 5 ft (1.5M), 4-pin plug to (3) BNC plugs (1)
Model 039A21 Allen wrench, 3/32" hex (1)
Model 081B93 Insulated cap screw, 5-40 thd x 1/2" long (for Model 354C10) (1)
Model ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1)
Entered: AP
Engineer: JJB
Sales: WDC
Approved: JJB
Spec Number:
Date: 11/8/2013
Date: 11/8/2013
Date: 11/8/2013
Date: 11/8/2013
17387
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]