Model Number
260A 12
Revision: C
ECN #: 50553
P erfo rm an ce
EN G L ISH
SI
Sensitivity(± 15 %)(X or Y Axis)
32 pC/lb
7.19 pC/N
[1]
Sensitivity
(± 15 %)(Z Axis)
15 pC/lb
3.37 pC/N
[1]
Measurement Range(Z Axis)
1,000 lb
4.45 kN
Measurement Range
(X or Y Axis)
1,000 lb
4.45 kN
Maximum Force(z axis)
1,320 lb
5.87 kN
Maximum Force
(x or y axis)
1,000 lb
4.45 kN
Maximum Moment(z axis)
40 ft-lb
54.23 Nm
Maximum Moment
(x or y axis)
70 ft-lb
94.91 Nm
Upper Frequency Limit
90 kHz
90 kHz
Non-Linearity
≤ 1 % FS
≤ 1 % FS
[2]
Cross Talk(between x and y axis)
± 3 %
± 3 %
Cross Talk
(between (x or y axis) and z axis)
± 5 %
± 5 %
En viro n m en tal
Temperature Range
-100 to +350 °F
-73 to +177 °C
Electrical
Capacitance(all channels)
30 pF
30 pF
[3]
Insulation Resistance(all channels)
≥ 10
12
Ohm
≥ 10
12
Ohm
Output Polarity(in direction of markings)
Negative
Negative
P h ysical
Preload
≤ 10,000 lb
≤ 44.48 kN
[4]
Stiffness(z axis)
19 lb/µin
3.3 kN/µm
[3]
Stiffness
(x or y axis)
6 lb/µin
1 kN/µm
[3]
Size (Height x Length x Width x Bolt
Diameter x ID x Sensing Surface)
0.390 in x 1.25 in x 1.25 in x
0.500 in x 0.512 in x 0.920 in
9.90 mm x 31.8 mm x 31.8
mm x 13 mm x 13 mm x 23.37
mm
Weight
1.5 oz
42.5 gm
Housing Material
Stainless Steel
Stainless Steel
Sealing
Hermetic
Hermetic
Electrical Connector(Quantity, 3)
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Side
Side
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
W
- Water Resistant Cable
Electrical Connection Position
Side
Side
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[2]Zero-based, least-squares, straight line method.
[3]Typical.
[4]Preload should be at least 10 times the X and Y operating range used.
Date: 04/17/2020
Date: 04/17/2020
Date: 04/17/2020
Date: 04/17/2020
14903
Entered: LK
Engineer: RPF
Sales: KK
Approved: RPF
Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
SU P P L IED A C C ESSORIES:
Model 081A74 Pre-load bolt (for Models 260A02, 260A12, and 260A32) (1)
Model 082M12 Anti-friction washer (for Models 260A02, 260A12, and 260A32) (1)
Model 083A13 Pilot bushing (for Models 260A02, 260A12, and 260A32) (1)
Model M081A74 Mounting Stud (1)