PCB Piezotronics 209C01, Installation And Operating Manual, Page: 16 / 17

Model Number
209C01
ICP® FORCE SENSOR
Revision: J
ECN #: 45224
Performance ENGLISH SI
Sensitivity(± 15 %) 2200 mV/lb 494,604 mV/kN
Measurement Range(Compression) 2.2 lb 0.00979 kN
Maximum Static Force(Compression) 11 lb 0.0489 kN
Broadband Resolution(1 to 10,000 Hz) 0.00002 lb-rms 0.00009 N-rms [1]
Low Frequency Response(-5 %) 0.5 Hz 0.5 Hz [2]
Upper Frequency Limit 100,000 Hz 100,000 Hz [3]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤ 0.05 %/°F ≤ 0.09 %/°C
Electrical
Discharge Time Constant(at room temp) ≥ 1 sec ≥ 1 sec
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 100 Ohm ≤ 100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Spectral Noise(1 Hz) 0.0000044 lb/ √ Hz 0.0000197 N/ √ Hz [1]
Spectral Noise(10 Hz) 0.0000005 lb/ √ Hz 0.0000021 N √ Hz [1]
Spectral Noise(100 Hz) 0.0000001 lb/ √ Hz 0.0000006 N/ √ Hz [1]
Spectral Noise(1000 Hz) 0.0000000 lb/ √ Hz 0.0000002 N/ √ Hz [1]
Output Polarity(Compression) Positive Positive
Physical
Stiffness 2 lb/µin 0.35 kN/µm [1]
Size (Hex x Height) 0.375 in x 0.610 in 9.53 mm x 15.49 mm
Weight 0.28 oz 8 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Thread 10-32 Female No Metric Equivalent
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
M
- Metric Mount
Supplied Accessory : Model M081A05 Mounting Stud 10-32 to M6 x 0.75 x 0.27" long BeCu
(H900), no shoulder (1)
N
- Negative Output Polarity
Output Polarity(Compression) Negative Negative
W
- Water Resistant Cable
Electrical Connector Sealed Cable Sealed Cable
Electrical Connection Position Side Side
NOTES:
[1]Typical.
[2]Calculated from discharge time constant.
[3]Estimated using rigid body dynamics calculations.
[4]See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 081A05 Mounting stud, 10-32 to 10-32 x 0.27" long, BeCu (H900), no shoulder (1)
Model 084A38 Thermal boot (for Series 209) (1)
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
[4]
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: LK Engineer: MJK Sales: KWW Approved: APB Spec Number:
Date: 3/29/2016 Date: 3/29/2016 Date: 3/29/2016 Date: 3/29/2016
6358