
Model Number
208M133
ICP® FORCE SENSOR
Revision: C
ECN #: 45224
Performance
ENGLISH
SI
Sensitivity(± 10 %)
10 mV/lb
2248 mV/kN
Measurement Range(Compression)
500 lb
2.224 kN
Measurement Range(Tension)
500 lb
2.224 kN
Maximum Static Force(Compression)
5000 lb
22.24 kN
Maximum Static Force(Tension)
500 lb
2.224 kN
Broadband Resolution(1 to 10,000 Hz)
0.01 lb-rms
0.0448 N-rms
[1]
Low Frequency Response(-5 %)
0.0003 Hz
0.0003 Hz
[2]
Upper Frequency Limit
36,000 Hz
36,000 Hz
[3]
Non-Linearity
≤
1 % FS
≤
1 % FS
[4]
Environmental
Temperature Range
-65 to +250 °F
-54 to +121 °C
Temperature Coefficient of Sensitivity
≤
0.05 %/°F
≤
0.09 %/°C
Electrical
Discharge Time Constant(at room temp)
≥
2000 sec
≥
2000 sec
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
100 Ohm
≤
100 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Spectral Noise(1 Hz)
0.000211 lb/
√
Hz
0.000942 N/
√
Hz
[1]
Spectral Noise(10 Hz)
0.000109 lb/
√
Hz
0.000488 N
√
Hz
[1]
Spectral Noise(100 Hz)
0.0000387 lb/
√
Hz
0.000173 N/
√
Hz
[1]
Spectral Noise(1000 Hz)
0.0000086 lb/
√
Hz
0.0000385 N/
√
Hz
[1]
Output Polarity(Compression)
Positive
Positive
Physical
Stiffness
6 lb/µin
1.05 kN/µm
[1]
Size (Diameter x Height)
0.625 in x 0.625 in
15.88 mm x 15.88 mm
Weight
0.93 oz
26 gm
Housing Material
Stainless Steel
Stainless Steel
Sealing
Hermetic
Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Side
Side
Mounting Thread
10-32 Female
10-32 Female
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
NOTES:
[1]Typical.
[2]Calculated from discharge time constant.
[3]Estimated using rigid body dynamics calculations.
[4]Zero-based, least-squares, straight line method.
[5]See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 081B05 Mounting Stud (10-32 to 10-32) (2)
Model 084A03 Impact Cap (1)
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
[5]
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: LK
Engineer: MJK
Sales: KWW
Approved: APB
Spec Number:
Date: 3/29/2016
Date: 3/29/2016
Date: 3/29/2016
Date: 3/29/2016
4630
Summary of Contents for 208M133
Page 17: ......