Model Number
201B76
ICP® FORCE SENSOR
Revision: B
ECN #: 53334
P erfo rm an ce
EN G L ISH
SI
Sensitivity(± 15 %)
1 mV/lb
224.8 mV/kN
Measurement Range(Compression)
5,000 lb
22.24 kN
Maximum Static Force(Compression)
5,000 lb
22.24 kN
Broadband Resolution(1 to 10,000 Hz)
0.10 lb-rms
0.445 N-rms
[1]
Low Frequency Response(- 5 %)
0.0003 Hz
0.0003 Hz
[2]
Upper Frequency Limit
90,000 Hz
90,000 Hz
[3]
Non-Linearity
≤ 1 % FS
≤ 1 % FS
[4]
En viro n m en tal
Temperature Range
-65 to +250 °F
-54 to +121 °C
Temperature Coefficient of Sensitivity
≤ 0.03 %/°F
≤ 0.054 %/°C
Electrical
Discharge Time Constant
≥ 2,000 sec
≥ 2,000 sec
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤ 100 Ohm
≤ 100 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Spectral Noise(1 Hz)
0.00307 lb/√Hz
0.0137 N/√Hz
[1]
Spectral Noise
(10 Hz)
0.00115 lb/√Hz
0.00513 N√Hz
[1]
Spectral Noise
(100 Hz)
0.000402 lb/√Hz
0.00179 N/√Hz
[1]
Spectral Noise
(1,000 Hz)
0.000114 lb/√Hz
0.000509 N/√Hz
[1]
Output Polarity(Compression)
Positive
Positive
P h ysical
Preload
1,000 lb
4.448 kN
Stiffness
16 lb/µin
2.8 kN/µm
[1]
Weight
0.25 oz
7 gm
Housing Material
Stainless Steel
Stainless Steel
Sealing
Hermetic
Hermetic
Electrical Connector
5-44 Coaxial Jack
5-44 Coaxial Jack
Electrical Connection Position
Side
Side
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M
- Metric Mount
Supplied Accessory: Model M081A11 Mounting Stud, M5 x 0.8 x 0.730, BeCu (1) replaces Model
081A11
Supplied Accessory: Model M083A15 Pilot Bushing, M5 x 0.8 (1) replaces Model 083A15
W
- Water Resistant Cable
Electrical Connector
Sealed Cable
Sealed Cable
Electrical Connection Position
Side
Side
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Typical.
[2]Calculated from discharge time constant.
[3]Estimated using rigid body dynamics calculations.
[4]Zero-based, least-squares, straight line method.
[5]See PCB Declaration of Conformance PS023 for details.
Date: 11/01/2022
Date: 11/01/2022
Date: 11/01/2022
Date: 11/01/2022
75646
Entered: ND
Engineer: MP
Sales: BS
Approved: RPF
Spec Number:
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
3425 Walden Avenue, Depew, NY 14043
SU P P L IED A C C ESSORIES:
Model 081A11 Mounting Stud, 10-32 x 0.730, BeCu (1)
Model 083A15 Pilot Bushing, 10-32 (1)
