- 1 -
ICP
is a registered trademark of PCB Group, Inc.
OPERATING GUIDE FOR 130 SERIES MICROPHONES
Contents:
1.0 Introduction ............................... 1
2.0 Product Description .................. 1
3.0 Powering ................................... 2
4.0 Installation and Operation ......... 3
5.0 Calibration ................................. 3
6.0 Service ....................................... 5
7.0 Warranty .................................... 5
Figure 1
1.0 Introduction
Congratulations on the purchase of a quality, ICP
Microphone. In order to ensure the highest
level of performance for this product, we recommend that you follow the basic installation and
operation procedures in this guide. By following these procedures, along with utilizing this
Microphone in conjunction with other PCB equipment (Signal Controllers, Power Supplies,
Cables, Calibrators, etc.), you will ensure years of trouble-free usage. If, after reading this
manual, you have additional questions concerning the Microphone or its application, feel free to
call a factory Application Engineer at 716-684-0001, or your nearest PCB Sales Representative.
2.0 Product Description
The PCB 130 series of Array Microphones are prepolarized, condenser microphones coupled
with ICP
sensor powered preamplifiers and are thus referred to as ICP
microphones. This
eliminates the need to purchase a separate preamplifier. The 130 series microphones provide an
extremely cost-effective method for large channel count sound pressure measurements. Typical
applications include sound pressure mapping, acoustic mode analysis, near-field acoustic
holography, and vibro-acoustic testing, along with other applications.
130E20
130E21
130E22
130A23
Summary of Contents for 130E22
Page 10: ......
