PCB Piezotronics 113B03, Installation And Operating Manual, Page: 15 / 17

Model Number
113B03
CHARGE OUTPUT PRESSURE SENSOR
Revision: C
ECN #: 40791
Performance ENGLISH SI
Sensitivity(± 15 %) 0.39 pC/psi 0.056 pC/kPa
Measurement Range 15 kpsi 103,420 kPa
Maximum Pressure 15 kpsi 103,420 kPa
Resolution 10 mpsi 0.07 kPa
[2][1]
Resonant Frequency ≥ 500 kHz ≥ 500 kHz
Rise Time(Reflected)
≤
1.0 µ sec
≤
1.0 µ sec
Non-Linearity ≤ 1.0 % FS ≤ 1.0 % FS
[3]
Environmental
Acceleration Sensitivity
≤
0.002 psi/g
≤
0.0014 kPa/(m/s²)
Temperature Range(Operating) -400 to +400 °F -240 to +204 °C
Temperature Coefficient of Sensitivity
≤
0.03 %/°F
≤
0.054 %/°C
[1]
Maximum Flash Temperature 3000 °F 1649 °C
Maximum Shock 20,000 g pk 196,140 m/s² pk
Electrical
Output Polarity(Positive Pressure) Negative Negative
Capacitance 12 pF 12 pF
[1]
Insulation Resistance(at room temp)
≥ 10
12
Ohm ≥ 10
12
Ohm
Physical
Sensing Element Quartz Quartz
Sensing Geometry Compression Compression
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm Invar Invar
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.212 oz 6.0 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
E
- Emralon coating [4]
Coating Emralon Emralon
Electrical Isolation(Case)
10
8
Ohm 10
8
Ohm
Supplied Accessory : Model 065A08 Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized
aluminum (3) replaces Model 065A02
Supplied Accessory : Model 065A22 Isolation Seal, .250" OD x .218" ID x .015", Torlon or
Vespel (3) replaces Model 065A02
H
- Hermetic Seal [4]
Sealing Welded Hermetic Welded Hermetic
J
- Ground Isolated [4][5]
P
- Positive Output Polarity
S
- Stainless Steel Diaphragm [4]
Diaphragm 316L Stainless Steel 316L Stainless Steel
W
- Water Resistant Cable [4]
NOTES:
[1] Typical.
[2] Resolution dependent on range setting and cable length used in charge system.
[3] Zero-based, least-squares, straight line method.
[4] For sensor mounted in thread adaptor, see adaptor installation drawing for supplied
accessories.
[5] Used with optional mounting adaptor.
SUPPLIED ACCESSORIES:
Model 060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel (1)
Model 060A05 Clamp nut M7 x 0.75-6g thd (1)
Model 065A02 Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (3)
Model 065A05 Seal sleeve sensor recess mount 0.248" OD x 0.221" ID x 0.240" thk 17-4 (1)
Entered: AP Engineer: MJK Sales: KWW Approved: BAM Spec Number:
Date: 3/19/2013 Date: 3/19/2013 Date: 3/19/2013 Date: 3/19/2013
40725
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com