PCB Piezotronics 112A03, Installation And Operating Manual

Page: 15 / 17

Model Number
112A 03
CHARGE OUTPUT PRESSURE SENSOR
Revision: J
ECN #: 50204
P erfo rm an ce EN G L ISH SI
Sensi/- 15 %) 1.20 pC/psi 0.17 pC/kPa
Measurement Range 10 kpsi 68,950 kPa
Maximum Pressure(static) 15 kpsi 103,420 kPa
Resolution 2 mpsi 0.014 kPa [1]
Resonant Frequency ≥ 250 kHz ≥ 250 kHz
Rise Time(Reflected) ≤ 2.0 µ sec ≤ 2.0 µ sec
Non-Linearity ≤ 1.0 % FS ≤ 1.0 % FS [2]
En viro n m en tal
Acceleration Sensitivity ≤ 0.002 psi/g ≤ 0.0014 kPa/(m/s²)
Temperature Range(Operating) -400 to +400 °F -240 to +204 °C
Temperature Coefficient of Sensitivity ≤ 0.06 %/°F ≤ 0.108 %/°C
Maximum Flash Temperature 3,000 °F 1,649 °C
Maximum Vibration 2,000 g pk 19,600 m/s² pk
Maximum Shock 20,000 g pk 196,000 m/s² pk
Electrical
Output Polarity(Positive Pressure) Negative Negative
Capacitance 21 pF 21 pF
Insulation Resistance(at room temp)
≥ 10
12
Ohm ≥ 10
12
Ohm
P h ysical
Sensing Element Quartz Quartz
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm Invar Invar
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight(with clamp nut) 0.212 oz 6.0 gm
[3]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
E - Emralon coating
Electrical Isolation
(Case) 10
8
Ohm (Case) 10
8
Ohm
Coating Emralon Emralon
Supplied Accessory: Model 065A08 Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized
aluminum (3)
Supplied Accessory: Model 065A22 Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel (3)
H - Hermetic Seal
Sealing Welded Hermetic Welded Hermetic
J - Ground Isolated
P
- Positive Output Polarity
S - Stainless Steel Diaphragm
Diaphragm 316L Stainless Steel 316L Stainless Steel
W - Water Resistant Cable
Supplied Accessory: Model 060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel (1)
W M - Water Resistant Cable
Supplied Accessory: Model 060A05 Clamp nut M7 x 0.75-6g thd (1)
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Resolution dependent on range setting and cable length used in charge system.
[2]Zero-based, least-squares, straight line method.
[3]See PCB Declaration of Conformance PS158 for details.
Date: 05/26/2020 Date: 05/26/2020 Date: 05/26/2020 Date: 05/26/2020 7103
Entered: LK Engineer: NJL Sales: RWM Approved: RPF Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
SU P P L IED A C C ESSORIES:
Model 060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel (1)
Model 060A05 Clamp nut M7 x 0.75-6g thd (1)
Model 065A02 Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (3)
Model 065A05 Seal sleeve sensor recess mount 0.248" OD x 0.221" ID x 0.240" thk 17-7 (1)