PCB Piezotronics 111A03, Installation And Operating Manual, Page: 15 / 16

Model Number
111A 03
CHARGE OUTPUT PRESSURE SENSOR
Revision: E
ECN #: 51177
P erfo rm an ce EN G L ISH SI
Sensitivity(± 15 %) 0.39 pC/psi 0.056 pC/kPa
Measurement Range 15 kpsi 103,420 kPa
Maximum Pressure(Total) 15 kpsi 103,420 kPa
Resolution 10 mpsi 0.07 kPa [1]
Resonant Frequency ≥ 300 kHz ≥ 300 kHz
Rise Time(Reflected) ≤ 2.0 µ sec ≤ 2.0 µ sec
Non-Linearity ≤ 2.0 % FS ≤ 2.0 % FS [2]
En viro n m en tal
Acceleration Sensitivity ≤ 0.01 psi/g ≤ 0.007 kPa/(m/s²)
Temperature Range(Operating) -400 to +400 °F -240 to +204 °C
Temperature Coefficient of Sensitivity ≤ 0.1 %/°F ≤ 0.18 %/°C
Maximum Flash Temperature 3,000 °F 1,649 °C
Maximum Vibration 2,000 g pk 19,613 m/s² pk
Maximum Shock 20,000 g pk 196,140 m/s² pk
Electrical
Output Polarity(Positive Pressure) Negative Negative
Capacitance 12 pF 12 pF [3]
Insulation Resistance(400 °F)
≥ 10
9
Ohm ≥ 10
9
Ohm
Insulation Resistance (at room temp)
≥ 10
12
Ohm ≥ 10
12
Ohm
P h ysical
Sensing Element Quartz Quartz
Sensing Geometry Compression Compression
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm Invar Invar
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.212 oz 6.0 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
E - Emralon coating
Electrical Isolation
(Case) 10
8
Ohm (Case) 10
8
Ohm
Coating Emralon Emralon
Supplied Accessory: Model 065A08 Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized
aluminum (3) replaces Model 065A02
Supplied Accessory: Model 065A22 Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel (3)
replaces Model 065A02
M
- Metric Mount
Supplied Accessory: Model 060A05 Clamp nut M7 x 0.75-6g thd (1) replaces Model 060A03
P
- Positive Output Polarity
S - Stainless Steel Diaphragm
Diaphragm 316L Stainless Steel 316L Stainless Steel
W - Water Resistant Cable
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Resolution dependent on range setting and cable length used in charge system.
[2]Zero-based, least-squares, straight line method.
[3]Typical.
Date: 10/21/2020 Date: 10/21/2020 Date: 10/21/2020 Date: 10/21/2020 33121
Entered: LK Engineer: NJL Sales: RWM Approved: RPF Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
SU P P L IED A C C ESSORIES:
Model 060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel (1)
Model 065A02 Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (3)
Model 065A05 Seal sleeve sensor recess mount 0.248" OD x 0.221" ID x 0.240" thk 17-4 (1)