55555
Hardware Configuration
Motherboard Layout
Motherboard Layout
Motherboard Layout
Motherboard Layout
Motherboard Layout
The following diagrams show the relative positions of the jumpers, connectors, major
components and memory banks on the motherboard.
# If you are using standard ATX power supply (without P4 12V power
connector), you MUST connect a peripheral power plug (the plug
supplying power to HDD / CDROM) into J16. Thus you can use either
ATX 12V power supply or standard ATX power supply for this motherboard
(Noted : NOT all kinds of standard ATX power supply are guaranteed to be
applicable in this motherboard.).
# USB3-USB Connector is only for VT8233 chipset.
NOTE
1)
Be sure to check the cable orientation in order to match the colored strip to the pin
1 end of the connector.
2)
When you start up the system, please wait for 5 seconds after you power on AC.
3)
It is not recommended to add a metal spacer plate on the back of the Socket478.
Otherwise, some components will be short and damaged.
