22
Technical Reference Booklet
Jumper Setting
Jumper Setting
Jumper Setting
Jumper Setting
Jumper Setting
This chapter explains how to configure the motherboard’s hardware.
Before using your computer, make sure all jumpers and DRAM modules are
set correctly. Refer to this chapter whenever in doubt.
JP10
1
JP2
Clear CMOS Jumper: JP2
Clear CMOS Jumper: JP2
Clear CMOS Jumper: JP2
Clear CMOS Jumper: JP2
Clear CMOS Jumper: JP2
There is a CMOS RAM on board that has a power supply from external
battery to keep the data of system configuration. With the CMOS RAM, the
system can automatically boot OS every time it is turned on. If you want to
clear the system configuration, use the JP2(Clear CMOS Jumper) to clear
data.
JP2
Selection
1-2*
Normal*
2-3
CMOS Clear
Close Open
* = Default setting.
Keyboard Power Select Jumper: JP10
Keyboard Power Select Jumper: JP10
Keyboard Power Select Jumper: JP10
Keyboard Power Select Jumper: JP10
Keyboard Power Select Jumper: JP10
JP10
Select
2-3*
Powered by +5V*
1-2
Powered by +5V Standby
