13
Chapter 2: Motherboard Installation
Jumper Settings
Connecting two pins with a jumper cap is SHORT; removing a
jumper cap from these pins, OPEN.
JP3: Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the mainboard and then move the jumper cap into the CLEAR
setting for a few seconds.
JP4: LAN Selector
Use this jumper to select LAN.
JP3
1
JP6
1
JP5
JP4
1
1
Function Jumper Setting
Clear CMOS Short Pins 1-2
Normal Short Pins 2-3
Function Jumper Setting
Enable Short Pins 1-2
Disable Open Pins 1-2