PC Chips M932, User Manual

Page: 21 / 43

1
AUX1
2: Mainboard Installation
Install the device(s) and connect power from the system power
supply. Use the cable provided to connect the device(s) to the
Primary IDE channel connector
IDE1 on the mainboard.
If you want to install more IDE devices, you can purchase a second
IDE cable and connect one or two devices to the Secondary IDE
channel connector
IDE2 on the mainboard. If you have two
devices on the cable, one must be Master and one must be Slave.
Internal Sound Connections
If you have installed a CD-ROM drive or DVD-ROM drive, you
can connect the drive audio cable to the onboard sound system.
On the mainboard, locate the two 4-pin connectors CD_IN1 and
CD_IN2 . There are two kinds of connector because different
brands of CD-ROM drive have different kinds of audio cable
connectors. Connect the cable to the appropriate connector.
CD_IN1
Pin Signal Pin Signal
1 GND 2 CD IN R
3 GND 4 CD IN L
CD_IN2
Pin Signal Pin Signal
1 CD IN L 2 GND
3 GND 4 CD IN R
17
IR1
1
2
CD_IN1
CD_IN2
1
JP3